route [-nqv] command [[modifiers] args]

DESCRIPTION

     Route is a utility used to manually manipulate the network routing ta-
     bles.  It normally is not needed, as a system routing table management
     daemon such as routed(8),  should tend to this task.

     The route: utility supports a limited number of general options, but a
     rich command language, enabling the user to specify any arbitrary request
     that could be delivered via the programmatic interface discussed in
     route(4).

     -n      Bypasses attempts to print host and network names symbolically
             when reporting actions.  (The process of translating between sym-
             bolic names and numerical equivalents can be quite time consum-
             ing, and may require correct operation of the network; thus it
             may be expedient to forgo this, especially when attempting to re-
             pair networking operations),

     -v      (verbose) Print additional details.

     -q      Suppress all output.

     The route: utility provides several commands:

     add         Add a route.
     flush       Remove all routes.
     delete      Delete a specific route.
     change      Change aspects of a route (such as its gateway).
     get         Lookup and display the route for a destination.
     show        Print out the route table similar to "netstat -r" (see
                 netstat(8)).
     monitor     Continuously report any changes to the routing information
                 base, routing lookup misses, or suspected network partition-
                 ings.

     The monitor command has the syntax

           route [-n] monitor

     The flush command has the syntax

           route [-n] flush [family]

     If the flush command is specified, route will ``flush'' the routing ta-
     bles of all gateway entries.  When the address family may is specified by
     any of the -osi, -xns, or -inet modifiers, only routes having destina-
     tions with addresses in the delineated family will be deleted.

     The other commands have the following syntax:

           route [-n] command [-net | -host] destination gateway

     If the destination is directly reachable via an interface requiring no
     intermediary system to act as a gateway, the -interface modifier should
     be specified; the gateway given is the address of this host on the common
     network, indicating the interface to be used for transmission.

     The optional modifiers -xns, -osi, and -link specify that all subsequent
     addresses are in the XNS OSI address families, or are specified as link-
     level addresses, and the names must be numeric specifications rather than
     symbolic names.

     The optional -netmask qualifier is intended to achieve the effect of an
     OSI ESIS redirect with the netmask option, or to manually add subnet
     routes with netmasks different from that of the implied network interface
     (as would otherwise be communicated using the OSPF or ISIS routing proto-
     cols).  One specifies an additional ensuing address parameter (to be in-
     terpreted as a network mask).  The implicit network mask generated in the
     AF_INET case can be overridden by making sure this option follows the
     destination parameter.

     Routes have associated flags which influence operation of the protocols
     when sending to destinations matched by the routes.  These flags may be
     set (or sometimes cleared) by indicating the following corresponding mod-
     ifiers:

     -cloning   RTF_CLONING    - generates a new route on use
     -xresolve  RTF_XRESOLVE   - emit mesg on use (for external lookup)
     -iface    ~RTF_GATEWAY    - destination is directly reachable
     -static    RTF_STATIC     - manually added route
     -nostatic ~RTF_STATIC     - pretend route added by kernel or daemon
     -reject    RTF_REJECT     - emit an ICMP unreachable when matched
     -blackhole RTF_BLACKHOLE  - silently discard pkts (during updates)
     -proto1    RTF_PROTO1     - set protocol specific routing flag #1
     -proto2    RTF_PROTO2     - set protocol specific routing flag #2
     -llinfo    RTF_LLINFO     - validly translates proto addr to link addr

     The optional modifiers -rtt, -rttvar, -sendpipe, -recvpipe, -mtu,
     -hopcount, -expire, and -ssthresh provide initial values to quantities
     maintained in the routing entry by transport level protocols, such as TCP
     or TP4.  These may be individually locked by preceding each such modifier
     to be locked by the -lock meta-modifier, or one can specify that all en-
     suing metrics may be locked by the -lockrest meta-modifier.

     In a change or add command where the destination and gateway are not suf-
     ficient to specify the route (as in the ISO case where several interfaces
     may have the same address), the -ifp or -ifa modifiers may be used to de-
     termine the interface or interface address.

     All symbolic names specified for a destination or gateway are looked up
     first as a host name using gethostbyname(3).  If this lookup fails, get-
     netbyname(3) is then used to interpret the name as that of a network.

     delete [ host &| network ] %s: gateway %s flags %x
             As above, but when deleting an entry.

     %s %s done
             When the flush command is specified, each routing table entry
             deleted is indicated with a message of this form.

     Network is unreachable
             An attempt to add a route failed because the gateway listed was
             not on a directly-connected network.  The next-hop gateway must
             be given.

     not in table
             A delete operation was attempted for an entry which wasn't pre-
             sent in the tables.

     routing table overflow
             An add operation was attempted, but the system was low on re-
             sources and was unable to allocate memory to create the new en-
             try.

SEE ALSO

     netintro(4),  route(4),  esis(4),  routed(8),  XNSrouted(8) IPXrouted(8)

HISTORY

     The route command appeared in 4.2BSD.

BUGS

     The first paragraph may have slightly exaggerated routed's  abilities.

BSD Experimental                March 19, 1994                               3